







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinet Installation & Refacing in Lake Forest, CA
New cabinet installation in Lake Forest typically runs $4,200 – $9,800 for a standard-size kitchen, while refacing the existing boxes with new doors and veneer usually lands between $2,600 and $6,400. Refacing makes sense when your cabinet boxes are solid and square. Full replacement is the right call when the frames are sagging, water-damaged, or laid out in a way that fights how you actually cook. We install and reface cabinets across Lake Forest, from the 1980s two-story homes off Trabuco Road to the newer builds near the Baker Ranch side of town, and we do it as part of a full kitchen remodeling scope or as a stand-alone project. Call (855) 532-8973 and a live person picks up, any hour, any day.
Groundwork Construction Co. of Lake Forest installs cabinets built by KraftMaid and other vetted manufacturers, and we back every install with our 730-Day Done Right Promise. If a door starts to sag or a drawer glides wrong two years in, we make it right. That’s not a line other contractors in Lake Forest are willing to write down.
Key Takeaways
- Refacing in Lake Forest starts around $2,600 and caps near $6,400 for a typical kitchen; full installation runs roughly $4,200 – $9,800 depending on size and material.
- We check your cabinet boxes for moisture damage and out-of-square framing before recommending refacing, because a bad box will ruin a good door.
- KraftMaid cabinetry, soft-close everything, and installer crews who have up to 12 years on the tools.
- Upfront pricing – the number we quote is the number you pay, and projects over $10,000 get $1,000 off.
- Free estimate and design consult, plus 0% financing for 18 months if you want to spread the cost out.

When You Need Cabinet Installation & Refacing
Cabinet work is one of those projects where the right timing is obvious once you name it. Here’s what we hear most often from Lake Forest homeowners who call us:
- The doors no longer close flush. In homes built through the 1980s and 1990s around the Lake Forest Golf & Country Club area, we regularly see hinges that have given out and doors that rub the frame. South Orange County’s dry summers pull moisture out of older particleboard and MDF, and cabinet doors warp after a decade or two of it.
- Water damage under the sink. A slow drip behind the garbage disposal rots out a cabinet floor in a few years. If the cabinet box has swollen particleboard, no amount of new doors will fix it – we replace the damaged boxes first, then reface the rest.
- The layout fights you. You’re reaching past one cabinet to get the pan you actually want, or your island has no room for the prep work you do every night. Re-layout means new installation, not refacing, and we’ll tell you straight which one you need.
- Resale or rental prep. Refacing is a fast, high-return cosmetic upgrade before a sale or a new tenant moves in. We see this a lot on the rental-heavy streets near El Toro Road.
- Appliance swap. Replacing an over-the-range microwave, a standard fridge with a counter-depth, or adding a wall oven generally means cabinet modification. If the new appliance is wider or taller than the opening, we trim or rehang the doors and face frames as part of the same job.
- The finish has worn through. White thermo-foil doors from the 1990s peel and delaminate in UV-heavy rooms. Lake Forest gets around 280 sunny days a year, and kitchen cabinets with south-facing windows show the damage first.
Our Cabinet Installation & Refacing Process
Here’s what the work actually looks like from the first call to the last door adjustment. Every project follows the same sequence, whether it’s a small refacing job or a full kitchen install as part of a larger kitchen remodeling project in Lake Forest.
- In-home consult and measurement. We measure the existing boxes, check plumb and level, look for moisture damage, and photograph the layout. We ask how you cook and what you store where, because a good cabinet plan starts with the work you already do. Free estimate and design consult – no charge for the visit.
- Material and door selection. We walk you through door styles, finishes, drawer organizers, and hardware. KraftMaid is our primary cabinet line because the construction and the warranty hold up. You’ll see samples side by side, not a catalog photo.
- Written quote, upfront pricing. You get the number in writing before any work starts. The number you see is the number you pay. If unknowns surface during demo (rotted subfloor, electrical moves), we stop and re-quote before continuing – no surprise change orders.
- Demo and prep. We pull old cabinets, protect the floors and counters, and check the wall for square and proper blocking. If a previous install was shimmed badly, we correct it. This is where a refacing job sometimes turns into a partial new install – we always tell you before that happens.
- Install or reface. New cabinets get shimmed level, screwed into wall studs, and the doors and drawers are adjusted on site. Refacing means new doors, drawers, veneer, and trim over your existing boxes. Hardware is set last. Most simple refacing jobs are completed in one visit; full installs and larger scopes run two to four days.
- Final walkthrough and cleanup. We open and close every door, pull every drawer, and adjust anything that isn’t right in front of you. Then we walk you through care and hardware adjustment. Everything is backed by the 730-Day Done Right Promise, so if something shifts or settles, we come back and fix it.
Our technicians are background-checked and arrive in uniform, and they have up to 12 years of experience on installs like this. Calls are answered by a live person 24/7, so if you think of a question the night before we arrive, you’ll get a human, not voicemail.

Cabinet Installation & Refacing Pricing in Lake Forest
Cabinet prices depend on cabinet count, door material, box construction, and whether we’re dealing with new install, reface, or both. Here are the real ranges we see in Lake Forest kitchens. The lower end reflects a small galley, the upper end a large kitchen with an island and pantry.
| Service | Typical Range | What’s Included |
|---|---|---|
| Refacing – basic | $2,600 – $4,200 | New doors, drawer fronts, veneer panels, hardware, on sound boxes |
| Refacing – with new boxes in damaged spots | $4,200 – $6,400 | Refacing plus replacement of one to three cabinet boxes, standard organizers |
| Full cabinet installation – standard kitchen | $4,200 – $7,400 | Stock or semi-custom cabinets, removal of old units, install, hardware, trim |
| Full cabinet installation – large kitchen or island | $7,400 – $9,800+ | Larger footprint, island cabinetry, pantry, specialty storage, custom trim |
| Single-cabinet swap or addition | $450 – $1,200 | One unit – great for adding a wine rack, trash pullout, or fixing a bad swap |
| Countertop removal and reinstall (if needed) | $600 – $1,800 | Required for new install; refacing usually keeps existing counters |
A few factors shift these numbers up or down:
- Cabinet count. A 10-cabinet kitchen is a different job from a 25-cabinet one. We count boxes, not linear feet, because that’s how the labor shakes out.
- Material tier. Painted MDF doors sit lower than solid maple or quartersawn oak. KraftMaid gives you real options across the price band without a quality cliff.
- Box condition. Solid, square, moisture-free boxes make refacing a good value. Worn or water-damaged boxes push the job toward replacement.
- Countertop decisions. New install almost always requires pulling the counters. If you’ve been thinking about Cambria or a butcher-block top, doing it in the same job saves money over a return trip.
- Access and layout. A galley with a tight corner costs more labor than an open L-shape, and second-floor kitchens with narrow stairwells add a trip or two of careful carrying.
We quote upfront, in writing, and we don’t do allowances that balloon later. If you’re comparing three or four bids, ours will be the one where the line items actually add up. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available if you’d rather spread the cost. Call (855) 532-8973 for your free estimate.
Why Refacing Beats Replacement – and When It Doesn’t
Refacing is the smarter spend when the boxes are healthy. You save 40 – 60% over full replacement, you keep your existing countertops and backsplash, and you’re in and out in a day or two. The catch: refacing can’t fix a bad layout, sagging boxes, or a kitchen that needs re-plumbing for a new sink position.
Here’s how we decide, and how we’ll walk you through it in person:
- Boxes square and dry? 10+ years of life left? Reface. You’ll get a fresh kitchen at roughly half the cost.
- Boxes swollen from moisture, out of square, or sagging at the shelf pins? New install. Refacing a bad box just puts good doors on a bad frame.
- Layout that needs to change – moving the range, widening the island, adding a pantry? New install. You can’t relocate a box you’re trying to keep.
- Small budget, big improvement wanted? Reface the visible kitchen, install new in the pantry and laundry, and blend the two in a way the eye doesn’t catch.
We’ve made this call hundreds of times on Lake Forest kitchens. We always recommend the option that holds up longer, not the one that’s faster to sell.
Materials and Brands We Work With
Cabinet quality comes down to three things: box construction (plywood beats particleboard for moisture resistance), drawer glides (soft-close, full-extension, real weight rating), and door material. We stock KraftMaid as our primary line and pull from their full catalog of door styles, finishes, and organizer inserts. Where the project calls for specific hardware, we’ll specify well-known brands so you know exactly what’s going in.
We also coordinate cabinetry with the rest of the kitchen scope. That means we can speak to the same material standards you’d expect if you were also choosing shingles or exterior products from our brand partners (GAF and CertainTeed on the roofing side, for example) – the point is that everything in this home is specified to the same standard, not mixed and matched from what happened to be in stock. From foundation to finish line, one contractor handles it.
How Long Does Cabinet Installation Take in Lake Forest?
Refacing usually takes one to two days. A full cabinet installation on a standard kitchen runs three to five days, with a couple of extra days built in for demo and any surprises behind the old cabinets. Islands and larger kitchens can push toward a week. We give you a written schedule before we start and we update you daily if anything shifts – no vanishing crews, no “we’ll be there next week” phone tag.
Pull-out-the-old, put-in-the-new is the fast part. The slow part is the detail: shimming a 1990s Lake Forest wall that’s out of plumb by a half-inch, trimming a door so it clears the counter reveal, and getting the drawers to glide exactly right. We don’t rush that part, because that’s the part you live with.
What to Check Before You Hire a Cabinet Contractor in Lake Forest
Cabinet work is a $3,000 – $15,000 line item for most Lake Forest homes. A few questions keep you out of trouble:
- Is the quote in writing with line items? A single lump-sum number hides the cabinet count, material tier, and labor split. You want to see all three.
- Does the contractor pull the right permits? Most refacing projects don’t require a permit in Lake Forest; structural changes (moving walls, adding an island with a new electrical circuit) usually do. A contractor who dodges the permit question on a structural job is telling you something.
- Who’s actually doing the install? Background-checked, uniformed installers, not a crew hired on the day. Ask.
- What’s the workmanship warranty? Ours is 730 days, in writing. Compare that to the standard 1-year warranty most companies offer and the gap matters.
- What happens if something’s not right six months later? Door sag, drawer misalignment, seam lifting on the veneer – these are the things that show up after the crew leaves. A written warranty with a name behind it is the difference between a fixed problem and a lost phone call.
FAQs – Cabinet Installation & Refacing
How much does cabinet refacing cost in Lake Forest?
Cabinet refacing in Lake Forest typically runs $2,600 – $6,400 for a standard-size kitchen, depending on cabinet count, door material, and whether any boxes need to be replaced. Call (855) 532-8973 for an exact quote – the estimate is free and we bring samples.
Is it cheaper to repair, reface, or replace kitchen cabinets?
Refacing is cheaper than replacing – usually 40 – 60% less – when the existing boxes are sound, square, and dry. Replacing is the better value when boxes are water-damaged or sagging, because refacing a bad frame just wastes good doors. Repairs (a single hinge, one door) are the cheapest option if that’s all that’s wrong. Call (855) 532-8973 and we’ll tell you straight which one your kitchen actually needs.
How long does cabinet installation take in Lake Forest?
Most full cabinet installations in Lake Forest run three to five days; simple refacing jobs take one to two. We give you a written schedule before we start, and we tell you if anything pushes the timeline – usually that’s a surprise behind the old cabinets, like a damp patch or an odd wall.
Can cabinet refacing be done in one day?
Yes, standard kitchen refacing can be completed in a single day when the boxes are in good shape and no countertop work is needed. Larger kitchens or refacing that includes new boxes in a few spots may run into a second day. Call (855) 532-8973 for an honest timeline on your specific kitchen.
Do you pull permits for cabinet work in Lake Forest?
Refacing usually doesn’t require a permit; most cosmetic swaps are permit-exempt. Structural changes – moving an island, adding a new electrical circuit for a wall oven, changing a load-bearing wall – do require permits, and we handle that process for you. If your project crosses into structural territory, we’ll say so upfront before the estimate.
What’s the 730-Day Done Right Promise cover on cabinet work?
It covers workmanship for 730 days from project completion. If a door sags, a drawer misaligns, a veneer seam lifts, or anything else we installed gives you trouble, we come back and make it right – no fine-print exclusion, no arguing about whether it’s “normal wear.” Manufacturing defects on cabinets are also covered by the cabinet manufacturer’s warranty (KraftMaid offers its own). The 730 days is ours, in writing, on the install itself.
Get a Free Cabinet Estimate in Lake Forest
Whether you’re refacing a kitchen for a sale or installing new cabinetry as part of a full kitchen overhaul, we’d rather you call and ask than guess. The estimate is free, the pricing is upfront, and the number you see is the number you pay. Projects over $10,000 get $1,000 off, and 0% financing for 18 months helps you spread a bigger job over time. Live person, 24/7 – call (855) 532-8973 anytime. Or start with the broader picture and see how cabinetry fits into the full home construction and remodeling services we handle.
Written by the team at Groundwork Construction Co. of Lake Forest, serving Lake Forest.


