







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterFence Gates in Lake Forest, CA
A fence gate in Lake Forest typically costs $350 to $950 to build and hang, depending on width, material and hardware, and most single gates are finished in one day. If you’re adding a gate to an existing fence line or replacing one that’s sagging, dragging or won’t latch, we handle the whole job: set the posts, build the frame, hang the gate, and tune the swing so it closes on its own. Call (855) 532-8973 for a free estimate.
Gates are the hardest-working part of any fence. A run of fence just stands there. A gate gets opened, swung, leaned on and slammed dozens of times a day, and it’s the first thing to fail when the posts weren’t set deep enough or the hinges were undersized. We build ours to survive the way people actually use them. A gate that drags through the dirt by month eight isn’t a gate that was built right.
This page covers gates specifically. If you’re planning a whole new fence line, start with our Fence Installation in Lake Forest page for materials, layouts and permit basics, then come back here for the gate details. If you need a gate added to a fence you already have, you’re in the right place.
Key Takeaways
- Most single pedestrian gates in Lake Forest run $350 to $950 installed, with driveway and double gates priced higher by width and material.
- Gate posts need deeper, heavier footings than line posts because the gate puts torque on them every time it swings.
- Hillside yards in Foothill Ranch and Portola Hills need gates built level even when the fence line isn’t – a common cause of drag and latch failure.
- We back every gate we build with our 730-Day Done Right Promise.
- Pricing is upfront before work starts, and calls are answered by a live person 24/7.

When You Need Fence Gates
Gates fail slowly, then all at once. Here are the situations Lake Forest homeowners call us about most.
- Your gate drags or won’t latch. A gate that scrapes the ground every time you open it usually has a post that’s shifted or a hinge pulling out of the frame. The fix isn’t just tightening screws. In dry inland summers, wood posts shrink and hardware loosens, and a gate that worked in spring starts to sag by August.
- The gate is sagging on wood posts that have rotted at the base. We see this in older neighborhoods where sprinklers have been hitting the same post for years. The post looks fine above ground and is soft as a sponge below it. A gate hung on a rotting post is a safety problem, not just an annoyance.
- You’re adding a side-yard gate for privacy, pets or pool access. A lot of Lake Forest homes have a side yard that opens straight to the street. A six-foot gate there changes how the whole yard functions, especially if you have dogs or a pool. Pool-adjacent gates should be self-closing and self-latching, and we build them that way as standard.
- You need a driveway gate or a double gate wide enough for a truck or trailer. Wider openings need heavier posts, better bracing and hardware rated for the weight. A double gate that sags in the middle inside a year was usually underbuilt at the center posts.
- Your current gate is the wrong width for how you use it. A 30-inch gate is fine on paper and miserable in practice if you’re carrying groceries or a stroller through it. We’ll size the opening to your actual daily use, not just the gap in the fence.
- An HOA or inspection flagged the gate. Many Lake Forest associations have rules about gate height, material, color and how gates look from the street. We build to those requirements so you’re not the one pulling it back down.
Our Fence Gates Process
Gate work looks simple until you’ve hung a few hundred of them. Here’s how we do it, start to finish.
- On-site measure and check of the existing fence. We look at the posts the gate will hang from, the swing direction, the ground slope, and how the gate will interact with your driveway, patio or side yard. If the existing posts aren’t sound enough to carry a gate, we’ll tell you before we quote the job rather than after.
- Upfront pricing on the exact scope. You get the full number before we start, including the gate, the hardware, any post replacement and any concrete work. The number you see is the number you pay, and if the scope changes we talk about it first.
- Set or reset the gate posts with proper footings. Gate posts get deeper footings than line posts and more concrete, because the gate lever-arms them every time it opens. On Lake Forest’s clay-heavy soils, footings need to be sized for the load and set below the frost-free depth so the post doesn’t walk.
- Build the gate frame and hang the gate. We build the frame square and brace it so it stays square. Hardware gets sized to the gate’s weight, and hinges are set so the gate swings freely on its own arc. For downhill yards, we build the gate level and adjust the fence line around it, which prevents the drag-and-latch problems that hillside gates are famous for.
- Tune, test and walk through it with you. We open and close the gate a few dozen times, check the latch, adjust the swing and confirm the gate self-closes where it should. You get a walkthrough, and we leave the area clean.
- Back it with the 730-Day Done Right Promise. If it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it applies to the gate the same way it applies to a whole fence line.

How Much Do Fence Gates Cost in Lake Forest?
Fence gate pricing in Lake Forest runs roughly $350 to $950 for a single pedestrian gate installed, and $900 to $2,400 or more for a double or driveway gate, depending on width, material, ground conditions and hardware. These are installed prices that include the gate, posts, hardware and concrete. A gate hung on an existing fence with sound posts is at the low end; a new gate that needs new footings, post replacement or slope correction is at the high end.
Here are the line items we typically see:
- Single pedestrian wood gate, 3-4 ft wide: $350-$700 installed
- Single privacy gate, 5-6 ft wide with heavier hardware: $450-$950 installed
- Double gate or driveway gate, 8-12 ft opening: $900-$2,400 installed
- Vinyl or composite gate: usually 20-40% above comparable wood
- New gate posts with footings and concrete: $150-$350 per post
- Self-closing or self-latching hardware upgrade: $75-$250
- Automatic gate opener, if you want one: quoted separately by weight, swing type and power access
A few things move the number up or down. Slope is the big one. A gate on flat ground is straightforward; a gate on a slope in Foothill Ranch or Portola Hills needs extra framing and sometimes extra posts to keep the gate level while the fence runs downhill. Material matters too, and so does the gate’s weight – heavier gates need heavier posts, hinges and latches, and that’s a small cost up front that saves you a much bigger repair later.
We keep pricing simple: upfront, written, no surprises. We also offer 0% financing for 18 months and $1,000 off projects over $10,000, which matters if the gate is part of a larger fence replacement or a full exterior project. Every estimate and design consult is free.
Is It Cheaper to Repair or Replace a Gate?
Repair is usually cheaper if the existing posts are sound and only the gate frame or hardware has failed. Replacement is the better call when the gate posts are rotting at the base, when the gate is undersized for how you use it, or when the same gate has been repaired twice. We’ll give you both options and the price for each, so you can make the call with the facts.
What Materials Do You Build Fence Gates With?
We build gates in the same materials as the fence line: cedar, pressure-treated pine, vinyl, composite and metal, and we match the gate to the existing fence so it reads as one continuous run. Color and finish are matched to the fence and, where an HOA requires it, to the association’s approved color list. Our gate hardware (hinges, latches, drop rods, self-closing springs) comes from established manufacturers so replacement parts aren’t a scavenger hunt in five years.
Do Fence Gates Need a Permit in Lake Forest?
Most fence and gate work in Lake Forest falls under the city’s residential fence rules, which cap fence height (commonly six feet in rear and side yards, lower in front) and set placement rules relative to property lines and sight lines at corners. Gates usually need to stay within the same height limits as the fence and stay out of the visibility triangle at street corners. We check the current rules against your specific property before building, and if a permit is required we’ll tell you before we start. We’re not a law firm and we don’t guess on code.
Why Lake Forest Homeowners Call Us for Gate Work
Fence gates are simple in concept and unforgiving in practice. Here’s what makes us a good fit for the job:
- We build gates for how they’re used, not just how they look. Hinges, latches and post depth are sized for the actual gate and the actual household.
- Our technicians have up to 12 years of experience with fence and gate work across South Orange County.
- Background-checked, uniformed technicians on every project. You know who’s in your yard.
- Calls answered by a live person, 24/7. No voicemail, no waiting until Monday when a gate post fails.
- Upfront pricing, no surprises. The number you see is the number you pay.
- The 730-Day Done Right Promise. If it’s not done right, we make it right. Built to last, backed in writing.
- No-hassle financing with 0% for 18 months and $1,000 off projects over $10,000.
Where We Work in and Around Lake Forest
We work throughout Lake Forest and the surrounding foothill communities – Foothill Ranch, Portola Hills, Rancho Santa Margarita and Mission Viejo. Local conditions matter for gates. Inland Lake Forest gets hot, dry summers and the clay-heavy soils shift with the seasons, which puts stress on gate posts and latches. Homes near the foothills deal with slope and drainage, and gates there need footings and framing built for the grade. If your gate has failed before, it usually failed for a reason specific to your property, and we’ll find it.
Fence Gates and the Rest of the Fence
A gate is only as good as the fence it hangs on. If the run is failing – leaning posts, split rails, wind damage – we’d rather fix the run than hang a new gate on a bad line. That’s why we treat the gate as part of the whole fence scope. If you want to see how the full project works, our Fence Installation page walks through materials, layout and the process end to end. For related exterior work, we also handle Driveway & Paver work in Lake Forest, which pairs naturally with a new gate or driveway opening.
What the Gate Hardware Actually Does
Hardware is where most gates quietly fail. The right hinge for a lightweight cedar gate is wrong for a six-foot privacy gate with a solid frame and a latch, and the wrong hinge is usually what turns a good gate into a dragging gate in a year. We size hardware to gate weight, swing direction and how it’s used (a gate that gets slammed by kids every day needs different hardware than a rarely used side gate). Self-closing springs, self-latching latches and drop rods are all standard options, and pool-adjacent gates get the self-closing and self-latching setup as a default.
Gate Design and Style
You don’t need a catalog unless you want one. We build the gate to match the fence – same height, same material, same rail layout, same finish – so it looks like it was always there. For homeowners who want something a little different, we can build a decorative top, a different rail pattern, or a metal frame with a wood infill. The point is that the gate fits the fence and the property, not the other way around.
What to Check Before You Call
Before you dial us, take a walk out and look at three things: the gate posts (are they solid at the base or soft?), the gate itself (does it hang square in the opening, or is the top rail drooping?), and the latch (does it catch cleanly or need a lift to close?). That’s most of what we need to know for a useful first call, and it speeds up the estimate. Bring us those observations and we’ll tell you whether you’re looking at a repair or a replacement.
FAQs – Fence Gates
How much does a fence gate cost in Lake Forest?
A single pedestrian gate in Lake Forest typically costs $350 to $950 installed, and double or driveway gates run $900 to $2,400 or more depending on width, material and ground conditions. Call (855) 532-8973 for an exact quote on your gate – estimates are free.
Can you build a gate on an existing fence?
Yes, we regularly add gates to existing fence lines, provided the posts the gate will hang from are structurally sound. We check them during the estimate, and if they need replacement we quote that upfront so there are no surprises. Estimates are free.
Do you build self-closing gates for pools?
Yes, we build self-closing and self-latching gates as standard for pool-adjacent gates, sized to the household and the safety rules that apply. Call (855) 532-8973 to talk through the specifics.
How long does it take to install a fence gate?
Most single gates are installed in one day, and double or driveway gates with new footings usually take two to three days because the concrete needs time to cure. If you need a gate in a hurry, call us and we’ll tell you what’s realistic.
Do fence gates need a permit in Lake Forest?
Most residential gates fall under the same city fence rules as the rest of the fence line, which cap height and set placement rules for rear, side and front yards. We check the current rules for your property before we build, and if a permit is required we tell you before we start. Call (855) 532-8973 if you want us to check yours.
Will you match the gate to my existing fence?
Yes, we match the gate to the existing fence in height, material, rail layout and finish so it looks like part of the original run, and we can match HOA color requirements where they apply. Free estimates on gate matching and replacement.
Ready for a gate that actually swings right? Call Groundwork Construction Co. of Lake Forest at (855) 532-8973 for a free project estimate and design consult. Upfront pricing, live person on the line 24/7, background-checked and uniformed technicians, and the 730-Day Done Right Promise on every gate we build.
Written by the team at Groundwork Construction Co. of Lake Forest, serving Lake Forest.


