







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Driveway & Pavers in Lake Forest: What to Know First
We install and repair Belgard paver driveways, patios and walkways in Lake Forest as an independent Belgard service provider. A typical paver driveway takes 3 to 6 working days from demolition to final joint sand, and Belgard paver driveway installation in Lake Forest runs $7,000 to $18,000 depending on square footage, base depth and which Belgard series you pick. There are no change orders on the back end; the number on your written, line-item estimate is the number you pay. Free estimates, and a live person picks up at (855) 532-8973.
This page is for Lake Forest homeowners who own a home with Belgard hardscape, have a Belgard driveway that’s settled, shifted, faded or cracked, and want straight answers from a contractor who actually lays the product. We’re not affiliated with or authorized by Belgard. We install and repair it, and we know it well.
How Belgard Products Fail – and How We Fix Them
Belgard makes good pavers. Most failures we see in Lake Forest aren’t the paver’s fault; they’re base, drainage and joint-sand problems that show up years after install. Here are the five we run into most.
- Settling and lippage in Belgard Mega-Arbel and Mega-Lafitt. These large-format slabs are heavy and rigid, so when the base compacts unevenly they telegraph every soft spot as a trip edge. In Lake Forest’s older tracts, we often find 4 inches of base where a thick slab wants 6 to 8. We lift the affected field, re-compact the subgrade, rebuild the base in lifts and re-set the slabs on a fresh bedding layer.
- Efflorescence on Belgard Urbana and Catalina. White haze on the surface isn’t damage; it’s mineral salts migrating up through moisture. The real cause is usually trapped water from a flat or back-pitched grade. We correct the slope and drainage first, then clean and re-sand, so it doesn’t return next season.
- Polymeric sand washing out of joints. Belgard recommends polymeric joint sand, and when it’s under-filled or the pavers weren’t cleaned before application, it fails within one or two winters. In Lake Forest, the rainy stretches from December through March expose it fast. We remove the failed sand, clean the joints, and re-fill to the correct depth.
- Cracked or chipped edge pavers along the driveway apron. Vehicle tires rolling over an unsupported edge break pavers at the street. That’s a restraint problem, not a paver problem. We reset the edge course on a proper concrete curb or edge restraint so the field stays locked.
- Color fade on Belgard’s integrally colored pavers. Sun and irrigation minerals dull the surface over time. Fade is cosmetic, not structural. We can clean and seal to bring color back, and we’ll tell you honestly when a seal isn’t worth the money.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Belgard Driveway & Pavers Process
- 1
Call and walkthrough. You call (855) 532-8973 anytime; a live person answers, day or night. We schedule a free on-site evaluation and measure the driveway, check slope and drainage, and photograph the failure points.
- 2
Diagnosis. We figure out whether the problem is the paver, the base, the joints or the drainage. That diagnosis decides the fix: a spot repair, a re-sand and re-set, or a full replacement.
- 3
Written, line-item estimate. You get the scope, materials and price in writing before anyone touches the driveway. Upfront pricing, no surprises. If Belgard factory replacement pavers are available we quote them; when an equivalent paver from the same series is the better value, we say so.
- 4
The work. We set up protection, demo what needs to come out, rebuild the base in compacted lifts, install the pavers to Belgard’s recommended pattern and joint width, and finish with polymeric sand. Permits get pulled and inspections passed where Lake Forest requires them.
- 5
Final walkthrough and test. We walk the finished driveway with you, check slope, drainage and joints, and leave it clean.
- 6
The guarantee. Every Belgard job is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat Belgard Driveway & Pavers Costs in Lake Forest

These are the ranges we quote homeowners in Lake Forest for Belgard and comparable paver work. Your written estimate nails the exact number.
| Job | Typical Lake Forest range |
|---|---|
| Paver driveway installation (Belgard) | $7,000 – $18,000 |
| Driveway replacement | $5,000 – $14,000 |
| Paver patio installation | $3,500 – $11,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway sealing | $250 – $700 |
What moves the price: square footage, base depth, whether existing concrete or pavers have to be removed and hauled, drainage corrections, and which Belgard series you choose. Larger-format slabs and premium colors cost more per square foot than standard 60mm pavers. We also offer 0% financing for 18 months and $1,000 off projects over $10,000. Call (855) 532-8973 to schedule your free estimate.
Why Lake Forest Homeowners Call Groundwork Construction Co. of Lake Forest for Belgard Work
We’ve been in business since 2014 serving local communities, and our technicians bring up to 12 years of experience with paver systems like Belgard. Every job is backed by the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction, and it’s in writing. Calls are answered by a live person 24/7, so you’re not waiting until Monday for an answer. Our technicians are background-checked and arrive in uniform, and you get a written line-item estimate before any work starts. Belgard is one of the material brands we work with, alongside partners like KraftMaid, Kohler, GAF and PGT across our other trades, so when your project touches more than the driveway we can handle the whole scope. From foundation to finish line, built to last, backed in writing.
FAQs

In most cases yes, as long as the repair follows Belgard’s installation guidelines and uses compatible materials and joint sand. We follow the manufacturer’s recommended practices so a repair doesn’t put your warranty at risk. Call (855) 532-8973 for an exact quote on your driveway.
Yes. Belgard pavers are available through local distributors, and we can often match the series and color of your existing driveway. When an exact match isn’t available, we tell you up front and lay out the closest options before any work starts. Call (855) 532-8973 for an exact quote.
If the problem is isolated, like a few settled pavers or washed-out joints, a repair is usually the right call. If the base is failing across the whole driveway or the drainage is wrong, replacement is the honest answer, because patching over a bad base just delays the same failure. We’ll tell you which one you need, in writing.
Most residential paver driveways take 3 to 6 working days, from demolition and base prep through setting and final joint sand. Size, base depth and weather add time. Call (855) 532-8973 to schedule your free estimate.
Yes, where Lake Forest requires a permit for driveway or drainage work, we pull it and pass the inspection. You don’t have to chase the city. Call (855) 532-8973 for an exact quote and we’ll walk you through what your project needs.
Written by the team at Groundwork Construction Co. of Lake Forest, serving Lake Forest and nearby areas.












