







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Lake Forest Homeowners Choose Belgard Construction
Groundwork Construction Co. of Lake Forest is an independent Belgard installer serving homeowners across Lake Forest, CA. We build and repair Belgard paver driveways, paver patios, retaining walls, and porcelain slab surfaces, and we specify the base, edge restraint, and joint sand each Belgard line actually needs instead of forcing one method onto every job. We are not affiliated with or authorized by Belgard. What sets our Belgard work apart in Lake Forest is slope-and-clay experience: we engineer the base for the expansive soil and graded hillside lots this city is built on, so the surface still looks new after several wet winters.
Belgard is a hardscape brand, not a general construction product, and that distinction matters. Most of what fails under a Belgard surface fails in the layers below it: base depth, compaction, drainage, and reinforcement. Our technicians have up to 12 years of experience with those layers. Every Belgard project is covered by our 730-Day Done Right Promise, and calls reach a live person 24/7. Call (855) 532-8973 for a free estimate.
Why Trust Groundwork Construction Co. of Lake Forest for Your Belgard Construction?

Belgard makes pavers, wall blocks, and porcelain slabs across many lines, and each line has its own installation requirements. Lafitt Rustic Slab wants a properly compacted aggregate base with tight edge restraint to hold the field. Catalina Grana needs clean joint sand and, in a dry-summer climate, careful attention to efflorescence before anyone seals it. Weston Stone retaining walls above a certain height need geogrid layers or they lean. Dimensions porcelain slabs need full bedding support so a corner doesn’t point-load and crack. Our crews know these differences and build to them.
We use genuine Belgard OEM pavers, wall blocks, and accessories for repairs and expansions so color and profile match the existing field. Where a quality aftermarket polymeric joint sand or edge restraint outperforms the standard component, we use it, because that’s what keeps a Belgard system locked together through Lake Forest’s clay movement and Santa Ana wind. Every job is warranty-safe: we follow Belgard’s published installation guidance so your product coverage stays intact. It’s background-checked technicians in uniform, upfront pricing, no surprises.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Fix in Lake Forest
Lake Forest’s expansive clay and semi-arid climate put specific stress on hardscape. Here are the Belgard problems we see most, and why they happen.
- Lafitt Rustic Slab pavers shifting and rutting. Almost always a base problem, not a paver problem. When the aggregate base is too thin or wasn’t compacted to depth, Lake Forest’s clay swells in wet winters and pushes the field up, and the pavers rock and separate at the joints.
- Catalina Grana color fading and efflorescence. The white chalky bloom is mineral salt rising to the surface, usually from moisture trapped in a field with poor joint sand stabilization or from sealing too early. Skipping joint sand stabilization leaves the system open to water and movement.
- Weston Stone walls bulging or leaning. Taller retaining walls need geogrid reinforcement tying the block back into the soil. Omit the geogrid, or backfill with the wrong material, and a graded slope plus winter rain load will push the wall out of plumb.
- Dimensions porcelain slabs cracking at corners. Porcelain is strong in compression but brittle under a point load. A corner that sits on a void in the bedding mortar will crack when something heavy rolls or drops on it. Full bedding support is the fix.
- Joint sand washing out after storms. Standard sand in joints erodes fast under winter rain and wind. Polymeric joint sand that was applied incorrectly, or not at all, leaves open joints that let water into the base.
A common pattern: a homeowner notices Belgard Lafitt pavers on the driveway rocking and separating at the joints after a few seasons. The usual cause is a base that was too thin or not compacted enough for Lake Forest’s expansive clay, letting the field move during wet winters. A qualified local pro typically lifts the affected field, re-compacts the base to proper depth, re-sets the pavers on fresh bedding sand, and installs new edge restraint and polymeric joint sand to lock the system together.
Belgard Parts & Our Repair-vs-Replace Approach

Matching an existing Belgard field means matching the actual line, color, and profile, which is why we source genuinely OEM pavers and wall blocks for repairs and expansions. For joint sand and edge restraint we’ll use a quality aftermarket component when it holds up better than the standard part, and we say so before the work starts. We don’t claim any local stock of Belgard parts. Each repair is sourced to the specific line and color on your property, so color match is confirmed before we lift a single paver.
On repair versus replace, we’re honest. Localized settling or a failed joint band is a repair. Base failure across the field, or more than 20% of the surface affected, is a full replacement, because patching over a failing base just moves the problem. You get a written line-item quote either way.
| Belgard Project | Typical Cost in Lake Forest |
|---|---|
| Paver Driveway Installation (Belgard) | $7000 – $18000 |
| Paver Patio Installation (Belgard) | $3500 – $11000 |
| Driveway Replacement (Belgard pavers) | $5000 – $14000 |
| Driveway Sealing (Belgard pavers) | $250 – $700 |
Call (855) 532-8973 to schedule a free estimate and get an exact number for your property.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We identify the exact Belgard line on your property, check base depth and compaction, look for trapped moisture or missing geogrid, and find the real cause of the failure, not just the symptom.
- 2
Set the scope. You get a written line-item quote covering repair or replacement, OEM part sourcing, and the base work required for that Belgard line.
- 3
Repair or install. We lift or set the field, re-compact the base, set pavers on fresh bedding sand, and install edge restraint and polymeric joint sand. For Weston Stone walls we add geogrid on taller runs. For Dimensions porcelain we ensure full bedding support.
- 4
Check and clean. Joints are filled and locked, the surface is checked for even plane and drainage, and the site is cleaned.
- 5
Back it in writing. Every project is covered by the 730-Day Done Right Promise. If it isn’t right, we make it right.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Lake Forest
We install and repair the Belgard lines that fit Lake Forest homes and clay lots. That includes Lafitt Rustic Slab pavers for driveways and patios, Catalina Grana pavers for patios and walkways, Weston Stone retaining wall blocks with proper geogrid reinforcement on taller walls, and Dimensions porcelain pavers for patios and modern hardscape where the base and bedding are built for point loads. We handle paver driveways, paver patios, and concrete driveway installation as part of the wider hardscape scope. If you’re not sure which line you have, we’ll match it on site.
We Also Service These Brands
Belgard is one of many verified brand partners we work with, so you’re never limited to a single manufacturer. We also service KraftMaid cabinetry, Kohler fixtures, GAF roofing, and PGT windows and doors. From foundation to finish line, one contractor can handle the hardscape and the rest of the home improvement scope for your Lake Forest property.
FAQs – Belgard Construction Service in Lake Forest

No. We are an independent Belgard installer, not affiliated with or authorized by Belgard. We follow Belgard’s published installation guidance so your product stays warranty-compliant, and we work with genuine Belgard materials for repairs and expansion.
Yes. For repairs and expansions we use genuine Belgard OEM pavers, wall blocks, and accessories to match your existing color and profile. For joint sand and edge restraint we’ll use a quality aftermarket component when it performs better, and we tell you which and why before the work begins.
Most Belgard repairs, like re-setting a rocking field or replacing joint sand, take a day or two. A full paver driveway or patio installation runs longer depending on square footage and base work. Your written quote gives a clear timeline so you’re not guessing.
We cover Lafitt Rustic Slab, Catalina Grana, Weston Stone, and Dimensions porcelain, along with the supporting base, edge, and joint-sand components each line requires. If you have another Belgard line, call (855) 532-8973 and we’ll confirm coverage.
Not when the work follows Belgard’s published installation requirements, which is how we build. We’re careful to keep your product coverage intact, and we use genuine Belgard materials for repairs and expansion so the matched field stays consistent.
Belgard paver driveway installation runs $7000 – $18000, paver patios $3500 – $11000, driveway replacement in Belgard pavers $5000 – $14000, and driveway sealing $250 – $700. Final pricing depends on square footage, base condition, and site access. Call (855) 532-8973 for an exact quote. Estimates are free.
Book Your Belgard Service in Lake Forest, CA
Whether your Belgard pavers are rocking, your Weston Stone wall is leaning, or you’re planning a new paver driveway or patio, we’ll diagnose it honestly and put the scope in writing. Call (855) 532-8973 to schedule your free estimate. Upfront pricing, a live person 24/7, and the 730-Day Done Right Promise back every Belgard job in Lake Forest.
Written by the team at Groundwork Construction Co.












