







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in San Clemente, CA: What It Takes and What It Costs
Concrete driveways and concrete work in San Clemente typically run $4,500 – $12,000 for a full driveway installation, with most residential pours landing in the $7,000 – $10,000 range once grading and coastal prep are factored in. A standard job takes three to seven working days from demo to the day you can park on it, depending on slope, drainage, and whether design review gets involved. Call (855) 532-8973 for a free on-site estimate with line-item pricing.
How a Concrete Driveway Goes In, Stage by Stage

Concrete work here is less about pouring and more about what happens before the first truck arrives. Here’s the actual sequence our crews follow, and where you’ll be making decisions.
Stage 1: Layout, grading, and the utility check (Day 1)
We mark the apron, walk the slope with a laser level, and call in a utility locate before anything gets cut. On hillside lots off Avenida Del Mar and the streets climbing toward Forster Ranch, this is where we find out whether the grade needs a retaining transition or a swale to push stormwater away from the garage slab. You’ll confirm the driveway width and apron flare at this point; wider entries and double aprons add square footage fast.
Stage 2: Demolition and haul-off (Day 1 – 2)
Old concrete, root-bound soil, and failed subgrade come out and get hauled to a licensed disposal site. A typical two-car driveway produces several truckloads of debris. If your existing slab sits over an old brick or gravel base from a 1950s cottage near the pier, expect a deeper excavation and more haul-off than a 1980s Marblehead tract home.
Stage 3: Base prep and formwork (Day 2 – 3)
We compact a graded aggregate base, set forms to the correct fall (usually a 2% slope away from the garage), and install any drainage. This is the stage most cheap concrete jobs skip, and it’s why their slabs crack within a couple of seasons. You decide here whether you want control joints laid out for a cleaner look or expansion joints at fixed spacing. On sloped San Clemente lots, we may add a small step or a flared apron to keep the transition from street to slab manageable.
Stage 4: Pour, finish, and cure (Day 4 – 5)
The pour itself is quick, but the finish and cure are what you’ll live with. We place 4- to 5-inch slabs with rebar or welded wire mesh, then finish to your chosen texture: broom for grip, light salt for a subtle tooth, or a smooth troweled surface near the garage door if you prefer. Curing takes 24 – 48 hours before foot traffic, roughly 7 days before you park on it, and about 28 days to reach full strength.
Stage 5: Sealing and final walkthrough (Day 6 – 7)
We apply a cure-and-seal to protect against salt air and UV, then walk the job with you to confirm drainage, joint layout, and finish. Any punch-list items get scheduled before we close out. Most San Clemente jobs finish in this window; heavier grading or design review can stretch it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Concrete isn’t one product. The choices below are the ones that actually change how your driveway looks, how long it lasts in coastal conditions, and what it costs.
- Standard broom-finished concrete – the workhorse choice, priced at the lower end of the $4,500 – $12,000 range. Good grip, easy to maintain, and the most forgiving surface for a family with kids or bikes.
- Exposed aggregate – pea gravel is broadcast into the surface and washed back to reveal the stone. Adds roughly $1 – $3 per square foot over broom finish and gives a warmer, more textured look that hides tire marks well.
- Salt-finished or light-textured concrete – a middle ground between smooth and exposed, with a subtle tooth. Popular on the Spanish-style homes near downtown where smooth troweled surfaces would show every footprint.
- Colored or integral-dyed concrete – pigment mixed into the batch rather than applied on top, so it won’t wear through. Pairs well with the warm stucco and clay-tile palette common in San Clemente; runs higher per square foot than plain gray.
- Reinforcement choice: rebar vs. welded wire mesh vs. fiber mesh – rebar is the standard for driveways carrying full-size vehicles; welded wire is lighter duty; fiber mesh adds crack resistance to the mix. On San Clemente’s sloped and sometimes expansive soils, rebar with a properly compacted base is the safest bet.
- Drainage add-ons – channel drains, trench drains, or a simple swale. Not glamorous, but on a hillside lot the difference between a dry garage and a wet one after a winter storm.
What Concrete Driveways & Concrete Work Costs in San Clemente, CA

Concrete driveway installation in San Clemente runs $4,500 – $12,000 for a typical residential job. A driveway replacement, including full demo and haul-off, lands at $5,000 – $14,000. Sealing an existing driveway is $250 – $700. Those are our published ranges, and the number on your written estimate is the number you pay.
Five things push a job toward the low or high end:
- Square footage and width. A single-car apron and a wide double with a turnaround are different jobs entirely.
- Existing condition and demo scope. A cracked slab over failing soil costs more to remove than a thin overlay.
- Grade and drainage. Hillside lots with retaining transitions need more base work and, sometimes, engineering.
- Finish and color. Exposed aggregate and integral color add cost per square foot over broom finish.
- Permit scope. Coastal and design-review conditions can add time and fees on lots where the driveway alters drainage or the street frontage.
Your written estimate itemizes demo, base prep, reinforcement, concrete volume, finish, drainage, and disposal. What it won’t typically cover: hidden utility relocations, unexpected rock excavation, or landscaping repair around the work zone. Those get priced before we touch them, never after.
See the difference
Before
After
Before
After
Before
AfterWhat San Clemente Homes Specifically Do to This Job
San Clemente’s construction market is shaped by coastal bluff-top and hillside topography paired with strict Coastal Commission and local geotechnical oversight. That matters directly for concrete work: on the bluff-top streets above T-Street and the pier, properties routinely need geotechnical reports before we can pour, and drainage design has to account for slope stability and ocean-view corridors. The city’s design-review process can add weeks to a project that would be a week’s work inland.
Housing stock changes the job too. The 1920s – 1950s Spanish Colonial cottages near the pier and downtown often sit on original single-wall or early stucco construction with unpermitted prior work and shallow, root-bound subgrade, so we excavate deeper and inspect what’s under the old slab. The 1960s – 1980s tract homes in Marblehead and Forster Ranch usually have more predictable base conditions but often need drainage corrections where the original builder sloped the driveway poorly. In Talega’s newer custom builds, we’re typically matching finish to an established hardscape rather than correcting old work. The marine layer and salt air also wear on exposed concrete edges and joints, so sealing matters more here than it would ten miles inland.
Because this is often the front end of a bigger exterior upgrade, homeowners frequently pair the concrete work with our Driveway & Pavers in San Clemente scope or ADU Site Prep & Utilities in San Clemente when a detached unit is part of the plan. We cover the full San Clemente area, and our Driveway & Pavers team handles the wider hardscape if you want the apron, walkway, and patio done as one project. Some homeowners also add Door Installation in San Clemente to finish the garage or entry once the pour cures.
Serving San Clemente, CA – Our Local Coverage Area
We serve San Clemente and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in San Clemente

Most concrete driveways take three to seven working days from demo to final seal, plus about 7 days of cure before you park on it. Jobs with heavy grading or design review run longer. We give you the schedule in writing up front so you can plan around it.
Many concrete driveway projects in San Clemente do require a permit, and bluff-top and hillside lots can trigger geotechnical review. We check the requirement for your specific property, pull the permit, and manage the inspection. Call (855) 532-8973 and we’ll confirm what your address needs.
Usually yes. Most driveways don’t sit over buried lines, but a utility locate before demo confirms it. If a line does run under the slab, we price the relocation into the estimate before work starts, not after. Upfront pricing means no surprise change orders.
Concrete driveway installation in San Clemente typically costs $4,500 – $12,000, with replacement at $5,000 – $14,000 and sealing at $250 – $700. The exact number depends on square footage, grade, finish, and permit scope. Call (855) 532-8973 for a free estimate, itemized line by line.
Every concrete project is backed by the 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it’s in writing. Our technicians are background-checked and arrive in uniform.
Schedule Your Free Concrete Estimate in San Clemente
For a free on-site estimate on concrete driveways and concrete work in San Clemente, call (855) 532-8973. A live person answers around the clock, so you won’t hit a voicemail. We’ll walk the property, confirm grade and drainage, and hand you a written line-item estimate covering demo, base prep, reinforcement, finish, and disposal. No-hassle upfront pricing, 0% financing for 18 months available, and $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co.












