







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in San Clemente, CA: What the Job Actually Involves
Paver driveways in San Clemente typically run $7,000 – $18,000 and take 3 – 6 working days from demo to final joint sand, depending on square footage, base depth, and whether the slope needs engineering. The job is excavation, a compacted aggregate base, edge restraint, then the pavers themselves set on a sand bed with polymeric joint sand worked in. Call (855) 532-8973 for a free on-site estimate with a written line-item quote.
How We Build a Paver Driveway, Stage by Stage

Five working days is a fair average on a standard two-car apron. Steep lots and anything touching a hillside push it longer. Here’s the real sequence.
Day 1: Layout, demo, and haul-off
We mark the new drive edges and confirm drainage direction before anything gets torn out. Then the old surface comes up, whether that’s failing concrete, worn asphalt, or an earlier paver layer, and it goes into a dumpster on site. On a typical San Clemente job that’s one full day of demo and hauling. You decide the finished width and whether you’re keeping or widening the existing apron before we cut.
Day 2: Excavation and base prep
We excavate to a depth that supports the final grade, then bring in Class II base rock in lifts. Compacted in 2-inch passes with a plate compactor and checked with a slope, the base is what stops the pavers from rutting later. Skipping compaction is the single most common shortcut we correct on other people’s work. Expect the driveway to look like a dirt trench at the end of this day.
Day 3: Edge restraint and geotextile
Concrete or steel edge restraint gets set along both sides and the transition to the street apron. A geotextile fabric goes over the base where the soil is expansive or the slope is steep, which keeps the base from pumping into the subgrade. This stage is quick but it’s the one that decides whether the driveway stays flat for the next fifteen years.
Day 4: Setting pavers
A 1-inch bedding sand layer is screeded, then the pavers are laid in your chosen pattern. Herringbone handles vehicle loads best; running bond is faster and less expensive but lets a little more shifting show over time. We cut field edges with a wet saw, which means the border is crisp rather than chipped. You’ll see the driveway looking finished by end of day, though it isn’t yet.
Day 5: Compaction, joint sand, and cleanup
A plate compactor runs over the field to seat the pavers, then polymeric joint sand is swept in and misted so it sets. The site gets swept, the dumpster goes, and we walk you through the finished drive. Polymeric sand needs to cure dry, so plan on keeping vehicles off the drive for about 24 hours.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
- Concrete pavers vs. clay brick pavers. Interlocking concrete pavers are the workhorse. They run lower per square foot, hold color for years, and suit San Clemente’s Spanish Colonial and Mediterranean homes when you pick a warm ochre or terracotta tone. Clay brick pavers cost more and are heavier, and they last decades, but you’re paying for the look as much as the durability.
- Finish type. A tumbled or antiqued finish reads older and coastal; a straight-edged, tight-tolerance finish suits newer Talega customs. Honest trade-off: tumbled hides tire marks and salt film better, straight-edged looks sharper longer but shows every scuff.
- Pattern. Herringbone and running bond are the two workhorses. Herringbone is stronger under load. Running bond lays faster and costs less labor, which matters because roughly a third of a paver drive is labor.
- Color and blend. A single color is cheapest. A blend of two or three tones costs a bit more but disguises the salt haze that settles on these coastal drives.
- Permeable vs. standard. Permeable pavers with open joints and a gravel sub-base let water drain on site. They cost more up front and need periodic vacuuming, but on a sloping San Clemente lot with limited runoff they solve a real problem.
What Paver Driveways Cost in San Clemente, CA

Plan on $7,000 – $18,000 for a paver driveway in San Clemente, installed. A standard two-car apron on flat ground lands near the bottom of that. Here’s what pushes it up:
- Square footage. This drives the number more than anything else. A single-car apron is a different job from a sweeping circular drive.
- Existing condition. Failing concrete that has to be broken out and hauled adds cost and time.
- Slope and drainage. On a sloped or hillside lot, the base has to be engineered, and that can add several thousand dollars to the base and drainage work.
- Paver grade and material. Standard concrete pavers at the low end, clay brick or permeable systems at the high end.
- Site access. Tight lots, narrow streets, and long hauls from the dumpster location all add labor, which is where a quote creeps.
A written estimate should spell out base depth, paver brand, pattern, edge restraint type, and haul-off. What it usually doesn’t include is lawn repair, moving a gas meter, or fixing drainage the city flags mid-job. We price those separately and in writing before work continues, so the number you see is the number you pay. This paver job is often part of a full Driveway & Pavers in San Clemente plan that ties in walkways and a patio in the same material.
See the difference
Before
After
Before
After
Before
AfterWhat San Clemente Homes Specifically Do to This Job
San Clemente’s market is defined by coastal bluff-top and hillside topography sitting under strict local geotechnical and design oversight. That changes a paver driveway build. On the bluff streets above the pier and T-Street, we routinely pull geotechnical reports because slope stability shapes what happens under the drive, and sometimes the base needs deep-pier or caisson support that a flat-lot drive never touches. The city’s design review can add weeks before a shovel goes in. Inland, the 1960s – 1980s tract homes in Marblehead and Forster Ranch usually sit on flatter lots with easier base work. Then there’s the salt. On ocean-facing elevations, joint sand and surface finish take a beating, and the marine layer keeps the drive damp, so we spec polymeric sand and, on permeable drives, a yearly vacuum to keep the joints open.
Serving San Clemente, CA – Our Local Coverage Area
We serve San Clemente and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Paver Driveways in San Clemente

A standard two-car paver driveway takes 3 – 6 working days, weather permitting, with demo on day one and joint sand on the last. Sloped or bluff-side lots run longer because the base work is more involved. Call (855) 532-8973 to get a firm timeline for your property.
Most straight replacements don’t require a building permit, but anything that changes drainage, touches a slope, or sits on a hillside lot usually does, and Coastal Commission oversight can apply near the bluff. We handle the permit pulls and inspections for you so you’re not chasing the city. Call (855) 532-8973 to find out what your lot needs.
Often yes, depending on how much of the existing edge and border you keep. Where the drive meets a planter or walkway, we cut clean and leave the adjacent finish intact. Heavy excavation near a wall or tree can change that. Call (855) 532-8973 for a site walk that tells you exactly what stays.
Paver driveways in San Clemente run $7,000 – $18,000, and plain concrete usually comes in below that. You pay the difference for durability, repairability, and the look. Call (855) 532-8973 for a no-hassle upfront quote on your square footage.
Every paver driveway we install is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. Our technicians have up to 12 years of experience, are background-checked, and arrive in uniform. Call (855) 532-8973 to ask what the promise covers on your project.
Get a Free Paver Driveway Estimate in San Clemente
Call (855) 532-8973 and a live person answers, any hour. We’ll set up a free on-site estimate, measure the drive, look at the base and slope, and hand you a written line-item quote with the pattern, paver choice, and timeline spelled out. No pressure, no surprise change orders. We’re proud to serve San Clemente and neighboring beach towns, and homeowners often pair this work with Door Installation in San Clemente or a Cabinets & Countertops in San Clemente upgrade while we’re on site.
Written by the team at Groundwork Construction Co.












