







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What a Chain Link Fence in Irvine, CA Costs and How Long It Takes
A Chain Link Fence in Irvine, CA typically runs $3500 – $9000, and most residential jobs are set, dug, and stretched in two to four working days once the posts are in. The price swings with linear footage, height, gauge, gate count, and how much old fencing and hedge has to come out first. Our technicians have up to 12 years of experience on this work. Call (855) 532-8973 to schedule a free on-site estimate, and we’ll walk the property line with you before anyone quotes a number.
How We Build a Chain Link Fence Here, Stage by Stage

Chain link looks simple from the street. It’s the underground work and the tensioning that decide whether the fence is still straight in fifteen years, and that’s where we spend the time.
Stage 1 – Site walk and line layout (about an hour, usually same visit as the estimate). We measure the actual run, check where the property pins sit, and find the buried stuff: irrigation lines, gas stubs, low-voltage landscape lighting, and old concrete footings from a fence that’s been replaced twice already. You decide at this stage where the gates go and whether you want the fence on the property line or inset a foot to stay clear of a neighbor’s overhang.
Stage 2 – Utility marking and demolition (day 1). Before any post hole is dug, utilities get marked – that’s not optional in Irvine and we won’t skip it. Then the old fencing, brittle hedge, and any abandoned posts come out, and the debris goes in the truck the same day. You decide here whether salvageable existing posts stay; on most aging Irvine runs they don’t, because a 1980s post in clay-heavy fill has usually rusted from the inside out where you can’t see it.
Stage 3 – Post setting (day 1 into day 2). Holes get dug to depth and set with concrete – roughly 36 inches on a standard 6-foot residential run, deeper on corners, gates, and end posts because those carry the tension. This is the stage that can’t be rushed. Concrete needs to cure before you hang a tensioned fence off it, so the schedule usually breaks here overnight or longer depending on the mix and the weather.
Stage 4 – Framework, mesh, and gates (day 2 or 3). Top rail, tension bands, and the chain link mesh get pulled and stretched with a come-along so it stays taut when the Santa Ana winds hit. Gates get set to their final swing, with hinges aligned and latches adjusted. You walk it with us and flag anything that rattles or sags before we call it done.
Stage 5 – Cleanup and final walk (day 3 or 4). Excess soil, concrete splash, and offcuts get hauled off. We re-walk the line, check gate clearance, and hand over the paperwork. The 730-Day Done Right Promise covers the workmanship, so if a post settles or a gate drops in the first two years, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Options You’ll Actually Choose Between
Chain link isn’t one product. These are the decisions that move both the look and the price:
- Gauge and wire weight. 11.5-gauge is the standard residential spec and holds up fine for a backyard. 9-gauge is noticeably heavier, costs 15 – 25% more in materials, and is what we recommend for runs along a slope or anywhere kids and dogs will lean on it.
- Height. 4-foot and 5-foot runs suit a side yard. 6-foot is the norm for a full perimeter. Anything over 6 feet starts triggering additional review in many Irvine village HOAs, so check before you commit.
- Coating. Galvanized steel is the value option and rusts slowly in Irvine’s dry air. Vinyl-coated (usually black or green) costs more but disappears visually against landscaping and holds up better if your sprinklers hit it constantly.
- Top rail and framework. A tension-wire top with no rail is cheaper and sags over time. A full top rail with line posts is the version that stays straight. We default to rail unless you specifically want the lighter look.
- Gates. A walk gate is standard. A double drive gate for an RV pad or side access costs significantly more once you factor in heavier posts and larger hinges – worth it if you’ll actually use it.
- Privacy add-ons. Slats woven into the mesh or a screen of hedge behind the fence add privacy. Slats are the cheaper route and can be added later; the trade-off is wind load.
What Chain Link Fence Costs in Irvine, CA

Expect $3500 – $9000 for a typical residential chain link installation in Irvine. That range holds whether you’re fencing a standard tract backyard or a longer acreage-style run on the edge of a planned community.
What pushes a job toward the low end: a short, straight run, galvanized 5-foot fence, no demolition, one walk gate, and easy digging. What pushes it toward the high end:
- Linear footage and corner count. Every corner and end post is a deeper hole and more hardware. A jagged property line costs more than a straight one at the same total length.
- Existing condition. Old concrete footings, root-bound soil, and overgrown hedge all add demo time. Removing a mature hedge line alone can add a full day.
- Slope and fill. Terraced lots and engineered fill mean racking the fence to follow grade and setting posts deeper. Steep runs need more posts per foot, not fewer.
- Material grade. 9-gauge over 11.5-gauge, vinyl coating over galvanized, full top rail over tension wire – each step adds cost and each one buys longevity.
- Gates and access. Double drive gates, custom widths, and self-closing hardware all add to the total.
A written estimate from us is line-itemed: footage, post count, gauge, coating, gate sizes, demo, and haul-away. Upfront pricing means the number you see is the number you pay. What typically isn’t included and should be asked about on any bid: utility locating beyond the standard free mark, stump grinding, retaining wall work, and any permit fees if a permit is required. During the estimate, you’ll also hear about 0% financing for 18 months and $1,000 off projects over $10,000 – both standing offers, not limited-time pressure.
See the difference
Before
After
Before
After
Before
AfterWhat Irvine Homes Specifically Do to This Job
Irvine’s master-planned structure changes the sequence of a chain link job. In Woodbridge, Northwood, or Turtle Rock, an exterior fence change often has to clear the village’s architectural review before the city permit is even filed. That’s a governance layer contractors working in Santa Ana or Tustin don’t navigate, and it’s the reason we ask for HOA approval documentation before scheduling a dig date. Skipping it can mean tearing out a finished fence.
The ground itself is its own story. Much of Irvine sits on former ranch land graded into terraced villages, so on hillside lots in Turtle Rock and Quail Hill you’re regularly hitting engineered fill. Fill behaves differently from native soil – it can settle, and post holes in it need to go deeper and be set with more concrete than a flat tract yard. On the flip side, Irvine’s semi-arid climate and near-zero freeze risk mean the ground rarely heaves. What does damage fences here is the sun and wind: Santa Ana wind events stress tensioned mesh, and vinyl-coated wire takes the UV load better over time. Homes built from the 1970s through the 2010s carry old galvanized posts that look fine above grade and crumble at the footing, which is the single most common failure we find on aging Irvine runs in ZIPs like 92602 and 92604.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Irvine

Most residential chain link fence jobs in Irvine take two to four working days, with posts set and cured before the mesh is stretched. Larger runs, hillside work, or jobs with heavy demo push toward the longer end. Call (855) 532-8973 for a timeline based on your actual property.
Irvine generally requires a building permit for fencing above a certain height, and your village HOA architectural approval is a separate step that often has to come first. Height limits and setback rules vary by village, so confirm the specifics before you buy materials. We pull permits and handle the inspection sign-off as part of the job.
Post holes can hit irrigation lines, gas stubs, or landscape lighting, which is why utility marking happens before we dig. We ask you to flag any known lines, and we hand-dig near anything confirmed. If you’re also planning site work, homeowners often pair this with ADU Site Prep & Utilities in Irvine so trenching and utility locating happen in one pass rather than twice.
The typical range is $3500 – $9000 for a residential installation in Irvine. Our written estimate is line-itemed and upfront – if we find unexpected concrete footings or heavier fill during the dig, we stop and talk to you before the price changes. Call (855) 532-8973 for a free on-site estimate.
Workmanship on your chain link fence is covered by the 730-Day Done Right Promise – if a post settles, a gate sags, or a stretch fails, we come back and make it right. The fence material itself is covered by the manufacturer’s own warranty, and we’ll walk through what that covers. Estimates are free and technician visits are background-checked.
Get a Free Chain Link Fence Estimate in Irvine
If you’re ready to price a chain link fence in Irvine, call (855) 532-8973. A live person answers around the clock, and we’ll schedule a free on-site estimate at your property, measure the actual run, and hand you a written line-item quote with upfront pricing. No change orders, no surprise numbers. And if the fence is part of a bigger project, it’s often done as part of a full Fence Installation in Irvine – you can see the wider scope in our Fence Installation service, or pair it with Door Installation in Irvine for a full exterior refresh.
Written by the team at Groundwork Construction Co.












