







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCustom & Geometric Windows in Lake Forest, CA
Custom and geometric windows are made-to-order units built to a specific opening and shape rather than pulled from a standard size chart: arches, half-rounds, trapezoids, triangles, eyebrow curves, full circles, and oversized picture windows that follow a roofline or frame a view. Homeowners in Lake Forest ask for them when a standard rectangle leaves an awkward gap, when a stairwell or vault needs daylight, or when a room deserves one window that carries the whole wall. Groundwork Construction Co. of Lake Forest handles the measuring, the configuration, and the install under our 730-Day Done Right Promise, so the shape you sketched on paper is the shape that ends up in the frame. Call (855) 532-8973 and a live person answers, day or night, to get a free estimate on the calendar.
Our brand partners for these projects include Andersen and Marvin, the same names we trust across our full Windows & Doors service. If your project also touches rooflines or trim, we pull from the same verified supplier list we use on roofing work, including GAF and CertainTeed.
Key Takeaways
- Custom and geometric windows are built to the opening, so the first step is an on-site measurement, not a catalog pick.
- Expect more lead time than a stock window. Made-to-order units in Lake Forest typically run 6 to 12 weeks from order to install.
- Because they’re sized to the opening, custom units are the fix for odd-sized holes that stock windows can only fill with extra trim and shims.
- The 730-Day Done Right Promise covers the workmanship on every install. If it’s not done right, we make it right.

When You Need Custom & Geometric Windows
Most homeowners don’t start out shopping for a shaped window. They start with a problem: a hole that won’t take a stock size, a dark hallway, a room that looks unfinished. Here’s where custom and geometric windows tend to come up around Lake Forest.
- A non-standard opening from an older home. Plenty of Lake Forest houses built in the 1970s and 1980s were framed to sizes that don’t line up with today’s stock inventory. Rather than build out the wall with extra trim, a made-to-measure window drops in clean.
- An arched or angled wall that a rectangle won’t fit. Half-rounds over a front door, trapezoids tucked under a sloped ceiling, or an eyebrow window following a curved roofline. The shape is the point, so the window has to be made to match.
- A stairwell or two-story entry that feels like a cave. A tall geometric or stacked unit turns a dark vertical run into a light well. This is one of the most common requests we field in the two-story tracts around Foothill Ranch and Portola Hills.
- Overlooking a view you want to frame. The ridgeline and canyon views from parts of Lake Forest deserve a picture window sized to the sightline, not to a standard grid. Custom sizing lets you crop the view where you want it.
- A front elevation that needs a signature. A round or specialty window above the entry gives the house a focal point and reads well from the street. HOA design review often has a say here, so we check the rules before we order glass.
- Replacing a failing specialty unit. If you already have a geometric window that’s fogged, leaking, or no longer opens, matching the original shape is the cleanest path, and we measure to the existing rough opening to keep the repair tight.
Our Custom & Geometric Windows Process
Shaped and made-to-order windows leave less room for error than stock units. One wrong measurement and the glass arrives wrong. Our process is built to catch that before anything is ordered.
- On-site consultation and measurement. We come out, look at the opening, check the framing, and confirm the shape and size against the actual wall. We also talk through your goals: light, view, curb appeal, and how the window will sit in the room. This visit is the free estimate and design consult, and there’s no charge for it.
- Configuration and brand selection. We walk you through the material and brand options, including Andersen and Marvin for made-to-order shapes. You see the trade-offs in plain terms: frame material, glass package, and how the unit is built, so you pick on the facts rather than the sales pitch.
- Upfront pricing before anyone orders. You get a clear number in writing before we place the order. The number you see is the number you pay, with no surprise line items for trim, flashing, or labor that show up after the fact. If the project clears $10,000, the $1,000 off promotion applies, and 0% financing for 18 months is available if you’d rather spread it out.
- Order and lead-time tracking. Made-to-order windows take time at the factory. We place the order, track it, and keep you in the loop on the delivery window so you’re not guessing when the crew shows up.
- Installation day. Our technicians are background-checked and arrive in uniform. They protect the surrounding surfaces, set the unit, flash and seal it properly, and clean up when they’re done. Most single-window installs wrap in a single visit; larger jobs or multi-unit walls may take longer, and we tell you which before we start.
- Final walkthrough and the 730-Day Done Right Promise. We walk the finished window with you, check the seal, the operation, and the finish, and confirm you’re satisfied. From that point, the workmanship sits under our 730-Day Done Right Promise. If it’s not done right, we make it right.

Custom & Geometric Windows Pricing in Lake Forest
Custom and geometric windows in Lake Forest typically run $900 to $3,500 per unit installed, with most single shaped windows landing in the $1,200 to $2,200 range and large or multi-unit walls climbing higher. The exact number depends on the shape, the size, the frame material, and whether the opening needs reframing. Those figures are ranges to help you plan. Your written estimate is the real number, and it’s free.
Here’s how the cost breaks down on a typical project, so you can see what drives the total:
| Cost factor | Typical range | What moves it |
|---|---|---|
| Standard rectangle, made-to-order size | $900 – $1,600 | Size, frame material, glass package |
| Single geometric shape (half-round, arch, eyebrow) | $1,200 – $2,200 | Complexity of the curve, glass area |
| Large picture or multi-pane geometric wall | $2,200 – $3,500+ | Total glass area, structural framing, crane or lift needs |
| Reframing or rough-opening adjustment | $250 – $900 | Whether the existing opening is square and plumb |
| Trim, flashing, and finishing | $150 – $600 | Interior and exterior finish matching |
What drives cost most is the shape itself. A clean half-round is a fairly standard order for the factory; a custom trapezoid that has to match a specific roofline angle takes more setup and more shop time, and that shows up in the price. Frame material matters too: vinyl tends to sit at the lower end, while wood-clad and premium aluminum sit higher. Glass package is the other big swing. A basic double-pane unit costs less than a high-performance package with low-E coating, argon fill, and laminated glass, and the upgrade usually pays back in comfort and energy bills.
Two things we don’t do: quote a shape we haven’t measured, and hide costs in the fine print. Before we order, you get the full number for the window, the install, the trim, and the flashing. The $1,000 off projects over $10,000 applies to larger jobs that combine windows with other work. If you’re planning a bigger scope, our Lake Forest service area page covers everything we handle locally.
Get a free estimate and design consult by calling (855) 532-8973. A live person answers 24/7.
Custom & Geometric Windows vs. Stock Windows
It’s fair to ask whether a shaped window is worth the extra cost over a stock unit and some trim. For some openings, a stock window is the right call. For others, the custom route saves you money in the long run because it avoids the buildup of trim and shims that come with forcing a standard size into a non-standard hole.
A stock window plus trim can work when the gap is small and the surrounding wall has room for extra casing. Custom sizing earns its place when the opening is significantly off-standard, when the shape itself is the design, or when you want the window to look built-in rather than adapted. In those cases, the made-to-order unit is the cleaner job, and it looks it. We’ll tell you which path fits your opening rather than push the more expensive one.
Brand Partners That Matter for Custom Shapes
Made-to-order windows aren’t the place to shop on price alone. The factory’s ability to build a true shape, hold to the measurement, and ship without damage is what separates a smooth install from a frustrating one. That’s why we keep a set of verified partners we trust across our trades: Andersen and Marvin for made-to-order windows, and GAF and CertainTeed for the roofing and trim work that often runs alongside a window project. Every partner on our list has been vetted for reliability, not just availability, so you’re choosing on quality and not on what happens to be in stock.
Why Lake Forest Homeowners Choose Groundwork
We’ve been serving local communities since 2014, and in that time we’ve learned that homeowners don’t want to be sold. They want a straight answer, a written number, and a crew that shows up and does the job right. That’s the whole pitch.
- 730-Day Done Right Promise. Workmanship is covered for two full years, and if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space.
- A live person, 24/7. Call any hour and a real person answers. No voicemail, no waiting until Monday.
- Background-checked, uniformed technicians. Every technician on every job is vetted and shows up in uniform.
- Upfront pricing, no surprises. The number you see is the number you pay, confirmed in writing before we order.
- 0% financing for 18 months and $1,000 off projects over $10,000, so a larger window project stays within reach.
Our technicians have up to 12 years of experience on window installs, and that experience shows up in the details that don’t photograph well but matter for years: proper flashing, correct shimming, and a seal that holds through our dry summers and the occasional wet winter. For the full range of what we do beyond windows, see our home page.
FAQs – Custom & Geometric Windows
How much do custom geometric windows cost in Lake Forest?
Custom and geometric windows in Lake Forest typically run $900 to $3,500 per unit installed, with most single shaped windows in the $1,200 to $2,200 range. The shape, size, frame material, and any reframing drive the final number. Call (855) 532-8973 for an exact quote; the estimate and design consult are free.
How long will I wait for a custom or geometric window?
Plan on about 6 to 12 weeks from order to install for most made-to-order units, because the factory builds the shape to your measurement. Simple rectangles move faster; complex curves and long-lead brand lines can take longer. Call (855) 532-8973 and we’ll give you a realistic lead time for your specific shape before you commit.
Can you replace a specialty window that’s already failing?
Yes. If you have a fogged, leaking, or stuck geometric window, we measure the existing rough opening and order a matching unit so the replacement sits tight without extra trim work. Call (855) 532-8973 to schedule a free estimate; most single replacements finish in one visit.
Do custom windows need HOA approval in Lake Forest?
Often, yes, especially for front-elevation changes and visible shapes. Many Lake Forest communities have design rules about window style and setback, and we check them before ordering so you’re not stuck with a window your association won’t approve. Call (855) 532-8973 and we’ll walk through the review with you.
Ready to Get Started?
If a standard window won’t fit the opening, or the room deserves a shape that isn’t a rectangle, we’re set up to handle the measuring, the ordering, and the install under one roof. Call (855) 532-8973 for a free estimate and design consult, and a live person will get you on the schedule. Upfront pricing, no surprises, and a 730-Day Done Right Promise on the workmanship.
Written by the team at Groundwork Construction Co. of Lake Forest, serving Lake Forest.


