







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Aliso Viejo, CA: What They Cost and How Long They Take
A paver driveway in Aliso Viejo runs $7,000 to $18,000, and most installations finish in 4 to 7 working days once the base is prepped. You’re looking at a tear-out of the old surface, a compacted base, edge restraints, then the pavers themselves set on a sand bed. Homes in 92656 with standard two-car aprons tend to land in the $9,000 to $13,000 range. Call (855) 532-8973 for a free on-site estimate.
How a Paver Driveway Goes In, Stage by Stage

Here’s the actual sequence, because “we handle everything” tells you nothing about what to expect on your property.
Stage 1: Walkthrough and layout (day 1, 1 to 2 hours). We measure the apron, check the slope toward the street so water drains away from the garage rather than into it, and confirm the paver pattern and border you want. You decide the field color, the border contrast, and whether the driveway ties into a walkway. Your HOA architectural application usually goes in around this point if you haven’t already filed it.
Stage 2: Demo and haul-off (day 1 into day 2). The existing concrete or asphalt comes out with a skid-steer and a jackhammer where needed. A typical two-car apron produces several truckloads of debris. You’ll want your cars off the driveway the night before, and street parking arranged for a couple of days.
Stage 3: Excavation and base (day 2 into day 3). This is the stage that decides whether the driveway lasts. We excavate 6 to 9 inches depending on the paver thickness and soil, then bring in crushed aggregate in lifts, wetting and compacting each lift with a plate compactor. On the graded lots common through the Chino Hills slopes, that base prep also includes making sure the subgrade is stable and the water has somewhere to go before winter rains arrive. Skipping compaction here is how driveways end up with ruts and shifted pavers two summers later.
Stage 4: Edge restraints and sand bed (day 3). A concrete or polymer edge restraint pins the field so pavers don’t creep outward under turning tires. Then a 1-inch bedding sand layer gets screeded flat. You don’t need to decide anything at this stage, though it’s a good moment to confirm whether you want a soldier course border or a clean field edge.
Stage 5: Setting pavers, cutting, and joint sand (days 4 through 6 or 7). Pavers go down, cuts get made at the edges and around any drainage grates, then polymeric joint sand gets swept in and compacted into the joints. We finish with a light clean-down. You’ll stay off it for a day before parking, longer if we apply a sealer.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make on a Paver Driveway
Most of the cost swing on a paver driveway comes down to four decisions. Here’s the honest trade-off on each.
- Concrete pavers vs. clay brick. Interlocking concrete pavers are the standard for driveways and handle Southern California’s dry-warm summer cycle well. Clay brick costs more, ages beautifully, and suits the Mediterranean look here, but it chips more easily under heavy vehicle loads. Belgard is one of the concrete lines we work with regularly.
- Paver thickness. 60mm pavers are common for walkways and light foot traffic; 80mm is the right call for a residential driveway taking cars and trucks. The price gap is modest and worth it.
- Pattern. Running bond is the most economical and easiest to lay. Herringbone and basketweave cost a bit more in labor and cutting, but herringbone interlocks better and resists shifting under turning wheels. On a slope, the pattern matters more than the color.
- Permeable vs. standard. Permeable pavers with open joints and a drainage base handle runoff better where the driveway sits near a slope or a shared drainage swale. They cost more but may help with drainage compliance on graded lots.
- Color and finish. Through-body color holds up under UV better than a surface coating. Tumbled or antiqued finishes read older and warmer; a clean-faced paver suits the tract-home stucco look more directly.
What Paver Driveways Cost in Aliso Viejo, CA

Plan on $7,000 to $18,000 for an installed paver driveway here. A three-car apron with a herringbone pattern and a border course sits at the top; a simple two-car running-bond install with standard pavers sits in the middle. Line items you’ll see in a written estimate:
| Item | Typical range |
|---|---|
| Paver material (60 – 80mm concrete) | $3,000 – $7,000 |
| Demo and haul-off of existing surface | $900 – $2,200 |
| Excavation and compacted base | $1,500 – $3,800 |
| Installation labor and cuts | $1,800 – $4,500 |
| Edge restraints, joint sand, clean-up | $400 – $1,000 |
What typically isn’t included: re-routing sprinkler lines under the driveway, new drainage grates or channel drains, sealer (usually a year-after add-on), and any HOA application or architectural review fee. Those get quoted separately once we see the site.
The variables that push a job to the high end here are size (a wide three-car apron versus a narrow townhome one), pulling the old concrete that’s thicker than expected, significant grade change on a sloped lot, premium pavers or brick, and permeable systems with extra drainage base. A flat, standard two-car replacement in a typical Aliso Viejo planned community usually lands mid-range.
See the difference
Before
After
Before
After
Before
AfterWhat Aliso Viejo Homes Specifically Do to This Job
Aliso Viejo was built almost entirely after 1982 and incorporated in 2001, so a paver driveway here is rarely a repair, it’s a finish upgrade – and that changes the vetting. The city reviews the permit, then the HOA reviews it again through the CC&Rs. That double review is the single most common delay on these jobs, and it’s why we start the HOA architectural submittal before the first day of work. Expect HOA specs to be specific about paver color and whether a border course is allowed; some Aliso Viejo associations require approved product lists.
The housing stock matters too. The 1980s through 2000s Mediterranean tract homes and townhomes here have attached garages and shared walls, so on attached units we plan staging and dumpster placement carefully to keep neighbor access clear. On the graded hillside lots around the Chino Hills edges, we plan strict erosion control before the first winter rains and confirm the base is stable where the grade drops. And because the climate is semi-arid with warm, dry summers, we schedule base work to avoid concrete curing in the hottest part of the afternoon and keep the turf and landscaping protected during tear-out. This is part of a full Driveway & Pavers in Aliso Viejo scope when the project extends to walkways or a patio.
Covering all of Aliso Viejo and the surrounding communities, we treat paver driveways as a focused job rather than a side note to our Driveway & Pavers service. Homeowners often pair this with Door Installation in Aliso Viejo when the garage front is getting refreshed at the same time, or with Cabinets & Countertops in Aliso Viejo on a broader remodel.
Serving Aliso Viejo, CA – Our Local Coverage Area
We serve Aliso Viejo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Aliso Viejo

Most installs run 4 to 7 working days from tear-out to final compaction, assuming your HOA approval is already in hand. If the architectural review is still pending, add one to three weeks. We schedule your start date once the approval is confirmed so you’re not paying for a crew sitting idle.
Any work that changes the driveway’s footprint, slope, or drainage typically needs a city permit, and HOA architectural approval is a separate step on top of it. Straight replacement in the same footprint may qualify for a lighter review, but we always check with the city before we start. We pull the permits and pass the inspections for you.
Overlaying pavers on sound concrete is possible but we rarely recommend it in Aliso Viejo, because the pavers sit higher than the street and can create drainage issues toward the garage. The base below the old slab is usually the weak point anyway, and paving over it hides the problem. A full tear-out costs $900 to $2,200 more in demo and buys you a driveway that lasts.
Installed cost here runs $7,000 to $18,000, with a standard two-car apron typically landing near $9,000 to $13,000. Size, paver grade, pattern, and site drainage drive the swing. Call (855) 532-8973 for a written line-item quote.
Every paver driveway we install is covered by our 730-Day Done Right Promise, so if the base, edges, or joints aren’t right, we make it right. Paver manufacturers also back their product, and you keep that warranty as the homeowner. It’s built to last, backed in writing.
Get a Free Paver Driveway Estimate in Aliso Viejo
Call (855) 532-8973 to schedule a free, no-obligation estimate for paver driveways in Aliso Viejo. A live person answers around the clock, evenings and weekends included. We’ll walk the driveway, measure the apron, talk through pattern and paver options, and hand you a written quote with fixed pricing – no surprises, no change orders. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co.












